Reamers for automatic lathes HSS-E with or without hard surface coating ACUREA, straight NC-shank h6 in whole mm-sizes, left hand spiral 7-8°, right hand cutting, from Ø 3.76 up to 20.05 in 0.01 mm increments available from stock or at short sight (also in H7 tolerance).
Also available with right hand spiral, right hand cutting (for blind hole reaming) on request.
Option: trough coolant (available from Ø 4 mm up to 20 mm, for an order of minimum 5 pieces per Ø).
|
| DIN 8089, DØ 03.76 - 04.20 |
|
Product Details >> | ||||||
| DIN 8089, DØ 04.21 - 04.25 |
|
Product Details >> | ||||||
| DIN 8089, DØ 04.26 - 05.20 |
|
Product Details >> | ||||||
| DIN 8089, DØ 05.21 - 05.30 |
|
Product Details >> | ||||||
| DIN 8089, DØ 05.31 - 06.11 |
|
Product Details >> | ||||||
| DIN 8089, DØ 06.12 - 06.25 |
|
Product Details >> | ||||||
| DIN 8089, DØ 06.26 - 06.70 |
|
Product Details >> | ||||||
| DIN 8089, DØ 06.71 - 07.25 |
|
Product Details >> | ||||||
| DIN 8089, DØ 07.26 - 08.20 |
|
Product Details >> | ||||||
| DIN 8089, DØ 08.21 - 08.50 |
|
Product Details >> | ||||||
| DIN 8089, DØ 08.51 - 09.25 |
|
Product Details >> | ||||||
| DIN 8089, DØ 09.26 - 10.20 |
|
Product Details >> | ||||||
| DIN 8089, DØ 10.21 - 10.60 |
|
Product Details >> | ||||||
| DIN 8089, DØ 10.61 - 11.25 |
|
Product Details >> | ||||||
| DIN 8089, DØ 11.26 - 12.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 12.06 - 13.20 |
|
Product Details >> | ||||||
| DIN 8089, DØ 13.21 - 14.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 14.06 - 15.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 15.06 - 16.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 16.06 - 17.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 17.06 - 18.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 18.06 - 19.05 |
|
Product Details >> | ||||||
| DIN 8089, DØ 19.06 - 20.05 |
|
Product Details >> | ||||||
© RE-AL AG/SA | 1963 - 2017 | webdesign by www.pub-rutz.ch